Brivis Heating & Cooling Melbourne

ExtrordinAir installs and services Brivis heating and cooling systems across Melbourne’s northern and western suburbs. We install, service and repair the full Brivis range across gas ducted heating, evaporative cooling and DualComfort add on cooling.

Brivis has been manufactured in Australia for more than 50 years and has been part of Rinnai Australia since 2014. Brivis engineered the first 5 star ducted gas heater sold in Australia, along with the Contour evaporative cooler. Some of the earliest Brivis heaters are still running today, thanks to Brivis strong parts supply. 

To book a Brivis Book a Brivis service or quote call 1800 296 885

arctick logo with installer number AU29403victorian building and plumbing commission logo

Get a Free Quote

Brivis Gas Ducted Heating Service, Repairs and Installation

Brivis gas ducted heaters have been keeping Melbourne homes warm for decades. ExtrordinAir services, repairs and installs Brivis gas ducted heating systems across Melbourne. Whether your existing heater needs attention or you are considering a new Brivis system, our experienced technicians can assess your home and recommend the most suitable option.

a brivis ducted heating system being repaired in a south melbourne home

a brivis ducted heating system being repaired in a south melbourne home

Brivis Gas Heating Servicing and Repairs

Your Brivis heater may need professional attention if it:

  • Struggles to warm the entire home
  • Turns on and off unexpectedly
  • Makes unusual noises
  • Displays a fault code
  • Blows cool or weak air
  • Costs more to run than it previously did
  • Has not been professionally serviced for several years

Our technicians work on current and older Brivis models, including the widely installed Buffalo, StarPro, Compact Classic and Wombat systems. We carry a range of commonly required Brivis parts, allowing many faults to be diagnosed and repaired without unnecessary delays. Regular servicing can also identify worn components, restricted airflow and combustion issues before they lead to a breakdown during Melbourne’s colder months.

Choosing a New Brivis Ducted Heater

If your existing heater is approaching the end of its working life, Brivis offers several options for different homes, budgets and efficiency requirements.

Brivis StarPro Series

StarPro is Brivis’ highest-efficiency gas ducted heating range, with 4, 5 and 6-star models available. Its four-pass heat exchanger and modulating gas valve allow the heater to adjust its output as conditions change, helping maintain a more consistent temperature while reducing unnecessary gas use.

Depending on the model and system design, StarPro heating can also be combined with Brivis ICE refrigerated add-on cooling. This can be useful if you want to retain ducted gas heating with the option of adding cooling through the same outlets.

Brivis Buffalo Series

The Buffalo is one of the most recognisable Brivis heaters in Melbourne. Known for dependable performance, Buffalo systems have been installed in Australian homes for more than 40 years.

ExtrordinAir can service and repair existing Buffalo heaters or help you determine whether replacing an ageing unit would offer better comfort, reliability and energy efficiency. We also cover faults and troubleshooting existing Brivis Buffalo heating systems here.

Brivis Compact Classic Series

The Compact Classic is designed for indoor installations where space is limited. Its smaller footprint can make it suitable for units, townhouses, and properties with restricted installation areas.

It provides a straightforward, price-conscious option for homeowners who want reliable whole-home gas heating without the additional features of the higher-efficiency ranges.

Brivis Wombat Classic Series

The two-piece Wombat Classic range offers flexible installation options for a variety of Melbourne homes. With models rated up to 3.8 stars, it can provide an economical replacement option where the installation layout or available space makes a conventional single-piece heater unsuitable.

Brivis Evaporative Cooling Service, Repairs and Installation

Brivis evaporative cooling is a popular choice for Melbourne homeowners who want fresh, whole-home airflow without the higher running costs associated with refrigerated air conditioning.The system draws warm outdoor air through water-saturated filter pads before distributing the cooled air through ducts and ceiling outlets. Because stale indoor air is continually replaced, a window or door must be left partly open while the system is running.ExtrordinAir services, repairs and installs Brivis evaporative coolers across Melbourne. Whether your existing unit is no longer cooling effectively or you are considering a new system, we can inspect your home and recommend the right solution.servicing a brivis evaporative cooler in melbourne

Brivis Evaporative Cooling Servicing and Repairs

Your Brivis evaporative cooler may need professional attention if you notice:

  • Warm air coming from the outlets
  • Weak or uneven airflow
  • Unpleasant or musty smells
  • Water leaking from the roof or cooler
  • Unusual noises during operation
  • A unit that repeatedly turns off
  • A controller displaying a fault
  • Cooling performance declining on hot days

Common causes include worn filter pads, blocked water distribution lines, pump faults, drainage problems, damaged components and accumulated dirt inside the cooler.

Regular maintenance helps keep the pads, pump, fan, water supply and drainage system working as intended. It can also reduce the chance of discovering a fault on the first genuinely hot day of a Melbourne summer.

Choosing a New Brivis Evaporative Cooler

If your existing cooler is becoming unreliable or you are installing evaporative cooling for the first time, Brivis offers several models for different homes, rooflines and airflow requirements.

Brivis Contour Series

The Brivis Contour has a low-profile design that sits more discreetly against the roofline than many traditional evaporative coolers. It can deliver high volumes of air without the tall, box-like appearance that concerns some homeowners.

This makes the Contour particularly appealing when cooling performance and the external appearance of the home are both priorities.

Brivis Promina Series

The Promina incorporates technology developed for the Contour in a more conventional rooftop design. Its Brivis-designed fan is engineered to move large volumes of air while keeping operating noise to a minimum.

It provides a practical balance of cooling performance, reliability and value for many Melbourne homes.

Brivis Advance Series

The Advance has a larger pad surface area designed to support homes with higher airflow requirements. It can be suitable for larger floor plans, new installations and homeowners replacing an older rooftop evaporative cooler.

ExtrordinAir also services and repairs existing Brivis Advance systems, including older units that may have been operating for many Melbourne summers.

Take a Look at Our Brivis Installations & Repair Work Across Melbourne

Other Brivis Services We Offer Across Melbourne – Add-On Cooling

Brivis DualComfort allows refrigerated cooling to be added to a compatible Brivis gas ducted heating system. It combines a StarPro gas heater with Brivis ICE™ Integrated Cooling Equipment, with heating and cooling operated through a single Brivis Networker controller.

The system can be installed in two ways. You can install the gas heater and refrigerated cooling together or begin with heating and add Brivis ICE later. Where the existing ducts, grilles and controls are suitable for refrigerated cooling, this may avoid installing a completely separate ducted system.

If ICE is being added to an existing heater, we first assess the StarPro model, duct size, insulation, airflow and system condition. Gas heating ducts are not always designed to handle refrigerated cooling, so some homes may require ductwork or control upgrades. Read more about why you can’t use heating ducts for air conditioning.

Is Brivis Add-On Cooling the Most Cost-Effective Option in 2026?

Brivis ICE add-on cooling remains available, but it does not attract a Victorian Energy Upgrades rebate. This is because the gas ducted heater remains in place rather than being decommissioned and replaced with an eligible electric heating and cooling system.

The cost of adding ICE can also be similar to installing a new ducted reverse cycle air conditioner, particularly when existing ducts or controls require upgrading.

For many Melbourne homeowners, replacing the gas ducted heater with an all-electric ducted reverse cycle system is therefore the more cost-effective option. One system provides both heating and refrigerated cooling, eliminates ongoing reliance on gas for heating and may qualify for a VEU discount of up to $5,530.

The amount available depends on the capacity and efficiency of the new system, the equipment being replaced and whether all VEU eligibility requirements are met.

veu rebates on reverse cycle air conditioning available at extrordinair

Compare Both Options Before You Decide

There are circumstances where Brivis ICE may still be your preference, particularly when the gas heater and compatible ductwork are relatively new and you prefer to keep gas heating.

Before recommending either option, ExtrordinAir can compare:

  • The cost of adding Brivis ICE to your existing heater
  • Any ductwork or control upgrades required
  • The cost of a new electric ducted reverse cycle system
  • Your likely VEU discount
  • Heating and cooling running costs
  • The age and expected remaining life of your gas heater

This gives you a realistic comparison based on the total installed cost over its life.

Brivis Zoning and Controller Installation

A Brivis controller determines when your system runs, which areas receive heating or cooling and how closely the home maintains your selected temperature. Upgrading an older controller can make your system easier to operate, while zoning and Wi-Fi control can give you more flexibility over comfort and energy use.

ExtrordinAir installs and replaces compatible Brivis controllers, zoning controls and Wi-Fi modules throughout Melbourne.

Brivis Networker Controller

The Brivis Networker is an easy-to-use wall controller with a clear LCD screen and rotary dial. It can operate compatible Brivis gas ducted heating, evaporative cooling and DualComfort add-on cooling systems.

Depending on the system, the Networker allows you to:

  • Set and maintain your preferred temperature
  • Program automatic operating times
  • Control heating and cooling from one interface
  • Operate compatible zones
  • View system status and fault information

We can assess older Brivis controllers and determine whether a current Networker or another compatible controller can be installed as an upgrade.

Brivis ZonePlus Zoning

Brivis ZonePlus gives compatible StarPro gas ducted heating systems individual temperature and time control across as many as four zones. A zone may be a single room or a group of rooms, such as the bedrooms, living areas or upstairs floor.

Instead of heating every room whenever the system is running, you can direct comfort towards the areas being used. This can help reduce unnecessary energy consumption while allowing different parts of the household to select more suitable temperatures.

Depending on the system design, additional temperature sensors or controllers can be installed within individual zones. Some configurations may also require a constant or common zone to maintain sufficient airflow.

ZonePlus is designed for compatible Brivis StarPro systems and can also work with Brivis DualComfort heating and add-on cooling. We confirm compatibility before recommending any zoning upgrade.

Brivis Touch Wi-Fi Control

A compatible Brivis Touch Wi-Fi module allows you to control your heating or cooling through an iOS or Android smartphone.

Depending on your appliance and zoning configuration, the app can allow you to:

  • Turn the system on or off remotely
  • Adjust the temperature
  • Change heating or cooling modes
  • Control compatible zones
  • Adjust fan and evaporative cooling settings
  • Give more than one household member access

The Wi-Fi module can be retrofitted to many Brivis gas heaters, evaporative coolers and add-on cooling systems fitted with a wired Networker controller. Compatibility varies between models, so the existing appliance and controller must be checked first.

Is the Controller Causing the Problem?

A blank screen, unresponsive controls, incorrect temperature readings or intermittent operation may point to a failed or ageing controller. However, similar symptoms can also be caused by the heater, cooler, wiring or power supply.

ExtrordinAir can test the controller and connected system before replacing anything. If the wall controller is responsible, replacing it is often a relatively straightforward repair. If the fault lies elsewhere, we can explain what needs attention and provide the appropriate repair options.

Contact ExtrordinAir to check which Brivis controller, zoning or Wi-Fi options are compatible with your system.

What Our Clients Say About Our Brivis Heating and Cooling Services

4.5
Based on 164 reviews
powered by