Celair Evaporative Cooling Service & Repair Melbourne
Older Celair evaporative cooling systems remain in many Melbourne homes. ExtrordinAir services, diagnoses, repairs, removes and replaces these systems across Melbourne’s inner suburbs.
Our Celair services include:
- Celair evaporative cooling service, repairs (where spare parts are still available), replacements, and removal
- Duct and outlet inspections
- Controller and thermostat diagnosis
- Advice on replacing old equipment with a current brand
To book a Celair service or repair, call or friendly team on 1800 384 988 or complete our form on this page.
Celair Evaporative Cooling Service, Repairs & Replacements
Signs your evaporative cooling system needs attention:
- Warm air coming from the outlets
- Weak airflow in some or all rooms
- A damp or stale smell
- Water leaking onto the roof
- The fan running without water reaching the pads
- The pump making an unfamiliar noise
- The controller failing to respond
- The cooler starting and stopping
- Excessive noise or vibration
- Water continuing to run after the system is switched off
- Visible corrosion around the cabinet
- Sections of the filter pads remaining dry
Some problems can be resolved with a cleaning and servicing of your evaporative cooling system or a replacement part. Extensive corrosion, damaged internal supports or difficulty sourcing compatible parts may make replacement more practical. We will let you know if we believe replacing your evaporative cooling system would make more economical sense.
Celair Controller Problems
Some older Celair evaporative coolers use wall controls such as the TEK600 series controller. Depending on the system, the controller may manage fan speed, pump operation, automatic settings and ventilation mode.
A controller problem may cause:
- A blank display
- Buttons that do not respond
- The fan or pump failing to start
- Intermittent operation
- Incorrect temperature readings
- Automatic mode failing to operate
- The system switching itself off
- Settings being lost after a power interruption
The controller is only one possible cause. Wiring, sensors, electrical boards and equipment inside the rooftop unit can produce similar symptoms.
Record any message or symbol shown on the display before switching off the system. This can help the technician identify the fault.
Celair Ductwork Repairs or Replacement
If you decide to upgrade your evaporative cooling system, existing ducts may be retained when they are correctly sized, insulated, securely connected and free from major damage.
We inspect the ductwork for:
- Split or crushed sections
- Loose connections
- Failed insulation
- Air leaks
- Water damage
- Dust and debris
- Incorrect duct sizes
- Poor outlet placement
- Deteriorated fittings
Should you decide to replace your Celair evaporative cooling system with reverse cycle air conditioning, the ductwork will be replaced as part of the new installation.
Why Choose ExtrordinAir for Celair Service and Replacement?
ExtrordinAir has worked on heating and cooling systems across Melbourne for 25 years. The team is based in Airport West and services homes and businesses throughout Melbourne’s inner suburbs.
Our Celair work includes:
- Servicing existing evaporative coolers
- Diagnosing heating and cooling faults
- Repairing older models where parts are available
- Removing unwanted rooftop equipment
- Replacing Celair units with supported current brands
- Inspecting ducts and controls
- Carbon monoxide testing for gas heaters
- Explaining repair and replacement costs
- Assistance with eligible Victorian rebates when switching to reverse cycle air conditioning
ExtrordinAir holds ARCtick licence AU29403 and Victorian building and plumbing registration 43459.
What Our Clients Say
Celair Service and Replacement FAQs
Can you replace Celair filter pads?
We can inspect the pads and determine whether compatible replacements are available. Pad condition and availability depend on the cooler model.
Can you repair a Celair wall controller?
We can diagnose controller and communication problems. Repair or replacement depends on the controller model and availability of compatible components.
Are Celair spare parts still available?
Some parts remain available through suppliers or compatible replacements. Availability becomes more limited as equipment ages. We confirm whether a suitable part can be sourced before recommending repair.
Which brand can replace a Celair evaporative cooler?
Possible replacement brands include Brivis, Braemar, Bonaire and Breezair. The right model depends on the home, ducts, dropper size and required airflow.
Can my existing Celair ducts be reused?
Suitable ducts may be retained if they are correctly sized, insulated and in good condition. We inspect them before quoting the replacement.
Can you remove my Celair evaporative cooler?
Yes. ExtrordinAir can disconnect and remove an unwanted Celair evaporative cooler. The quote will explain how the roof opening and associated ducts will be handled.
Can you replace Celair evaporative cooling with ducted air conditioning?
Yes. ExtrordinAir can remove the Celair cooler and install a ducted reverse cycle air conditioner. Please reach out to us for a no obligation quote.
Book a Celair Service, Repair or Replacement Quote
ExtrordinAir works on existing Celair evaporative coolers across Airport West, Essendon, Keilor East, Moonee Ponds, Pascoe Vale, Brunswick, Coburg, Preston, Reservoir and surrounding suburbs.
To get in touch, complete our form below or call our Melbourne office on 1800 296 885.
